Datsun Roadster 1970 3 piece Interior Windshield Pad - Set
Can use for 68/69 Model Years as Well Returning January
Reproduction Interior Windshield Frame Pad set. Photo looks gray, but the part is actually molded in a hard black vacuum formed plastic.(set of 3) This is what shows up at your door step. This mounts on the inside metal frame of your windshield. There is also a top trim piece, (not pictured), that comes with the kit. Instructions are included with the kit.This Vacuum formed kit is a replica of the 1970 model. Comes with a top trim piece not pictured. Although it is different then the 68 and 69 model many roadster owners have used this in place of the 68 /69 model
"Gorilla glue" has been recommended by a customer as a alternate glue for securing the 3 pieces pictured. It can be a bit messy though. You can also try 1/32" thick 1/2" wide double sided foam tape. The surfaces must be clean and the part must be positioned properly before pressing. Once pressed the tape is not re-usable.
Our 3 piece pad set is our best seller.
A little bit of work is required for fitting the left hand and right pieces to flush fit to the center piece. Also drilling holes at the drill point locators is also required and of course assembling and gluing.