2578A.170" Order by PART# 2578B.190" Order by PART# 2578C.205" Order by PART# 2578D.220" Order by PART# 2578E.240" Order by PART# 2578F.280" Order by PART# 2578G LASH PAD SELECTION NOTE: Camshafts are listed at part # 1499 & 1517. To figure out which lash pad to select based on a camshaft you have purchased from someone else please use the following formula. (Be aware that valve length, seat depth - installed height and individual ground or new rocker arms can affect geometry thus rendering a different lift value "at the valve" other than the theoretical lift values based on the cam card lobe lift multiplied by the 1.396 rocker arm ratio) FORMULA: Use the following example and plug in your own numbers. Base circle diameter of your camshaft ___ subtracted from the constant 1.310 = ____ divided by 2 = ___ + original lash pad thickness of .078 = ___. Select a lash pad thickness from our stock as close to this thickness as possible.">

How to use this website

Frequently Asked Questions

Why Buy From Datsun Parts?

Nissan/OEM/AfterMarket Differences

Engineering

Ordering, Shipping, Returns, Policies

Warranty Return Policy

Returns / Important

Parts Purchasing Department

Mission Statement

Customer / Manufacturer Quotes about Datsun Parts

Limits of Liability Statement Important Read

Charitable Giving

Gallery of Fine Cars


Nissan Parts Dump

Dash Comments

Map to our location

Home

ImagesCategoriesDescriptionPrice
Cylinder Head U20
Partnumber: 2578
Datsun L - Series Lash Pads - Set of 8

L-series lash pad sets for our special U20 chrome moly heat treated retainers that accept the narrower L-series lash pads. Sizes soon available:The following parts numbers are for each lash pad from left to right starting with the second lash pad:

.160" Order by PART# 2578A

.170" Order by PART# 2578B

.190" Order by PART# 2578C

.205" Order by PART# 2578D

.220" Order by PART# 2578E

.240" Order by PART# 2578F

.280" Order by PART# 2578G

LASH PAD SELECTION NOTE: Camshafts are listed at part # 1499 & 1517. To figure out which lash pad to select based on a camshaft you have purchased from someone else please use the following formula. (Be aware that valve length, seat depth - installed height and individual ground or new rocker arms can affect geometry thus rendering a different lift value "at the valve" other than the theoretical lift values based on the cam card lobe lift multiplied by the 1.396 rocker arm ratio) FORMULA: Use the following example and plug in your own numbers. Base circle diameter of your camshaft ___ subtracted from the constant 1.310 = ____ divided by 2 = ___ + original lash pad thickness of .078 = ___. Select a lash pad thickness from our stock as close to this thickness as possible.
$65.00 (8)

Copyright © 1996-2019 DatsunParts.com. All rights reserved.