Stay Off of eBay!
Save 5 to 20% with us of any eBay Datsun Roadster Parts sold by other vendors
No As Is Where Is No Warranty Sales.
We Warranty the Products We Sell
AFTERMARKET USA
1289- 10 years ago, I personally machined the master and paid for the tooling for our isolator and it is correct for every comp spring that is made and we tested this on our own car. We felt there was a need for these to help people who had purchased the Mike Young springs as there was no support and nothing available from anyone selling these springs for 3 decades up until 3 years ago when ours was copied, the highest form of validation.Once again we were the first to make a product available that has needed.
1289DRP - 3 years ago made in Georgia
Look at the thin taper the smaller diameter to fit the comp springs properly.
Datsun Roadster & Fairlady Front Urethane Coil Spring O-ring Pads
FOR FRONT COMPETITION SPRINGS
AFTERMARKET USA
These isolators are not the Energy Suspension coil spring isolators that were designed for the stock springs, which have a larger inner diameter, than the competition spring.
We all have stuffed the Energy parts into the comp springs and know how tight they are, not allowing the spring to "seat" properly.
Simply cutting off the raised ridge that centers the spring on the Energy parts allows the springs to flop around on the metal centering ring...bad move and cheap fix. Leaving out the urethane or rubber all together, at the top of the spring seat, is another bad move with even more slop unless you want to show up with noisy springs at the Roadster meet. Well no more of that.
These exclusive parts to Datsunparts, I cut the aluminum master myself, are specifically designed for the competition springs for our own 2103, 2107, 2113, 2116 spring sets and the 2175 Mike Young spring set, all of which, have larger diameter wire and hence forth a smaller inside diameter. The raised urethane radius on our part, supported by the metal centering ring at the top of the spring seat, center the springs beautifully. You can also use these on the bottom spring seat to play around with the overall height and use extra sets as a shim kit.
2nd, 3rd and 4th photo show the precise and perfect fit to the upper and the lower spring seats. Spring shown in the photo is a Mike Young spring made by Bett's Spring in Fresno. Ca.
Fits: 1963, 1964, 1965, 1967, 1967 1/2, 1968, 1969, 1970