Datsun Roadster & Fairlady Rear Lowering Stock & Competition Rate Leaf Spring Set AFTERMARKET USA
NOT to be confused with the Nissan Motorsports, NO ARC, 55020-25510 HARD springs that were sold by Nissan Motorsports.
These US made reproductions offer a ride height that will LOWER the car in the back with TWO different spring rates available to choose from. The 1st spring rate is a stock rate of 158 LBS. This will give you a nice balanced look when using lowering springs on the front and a comfortable ride in the back with good performance. In other words you will achieve the "Lowered competition look" without having a rougher ride in the back see 1st PHOTO: Our rear springs with a set of Mike Young Front Competition springs. 185/70/14 tires on 14 inch rims. We call these 55020-25511. Order by PART#2117
The 2nd spring rate is slightly higher at 185 LBS and offers the same ride height with better performance for track applications. We call this set 55020-25511C. Order by PART# 2117C Both the 2117 and the 2117C spring sets come with the front bushings installed and are the same price.
2nd PHOTO: 12 piece urethane rear bushing kit. NOTE: To add this kit onto either of the above spring sets you are purchasing- Order by PART#2117BUSH or 2117CBUSH
3RD & 4TH PHOTO: Lowering springs 158 lb rate
5TH & 6TH PHOTO: Lowering springs 185 lb rate
Cosmetic duplication processes: Each leaf of the assembly was duplicated as close to the original as possible including the spacers between each leaf, and even the assembly brackets have been duplicated. The cups as pictured in the 2nd & 6th photos are no longer reproduced. Our leaf spring sets come with the front spring bushings already installed. When comparing pricing, please note that pricing from other vendors of their spring sets reflects springs sold WITHOUT the front bushings installed
Manufacturing processes: Each leaf is made from 5160 American made raw steel and is formed on a jig with the correct arc at 1800 degrees. Each leaf is then oil quenched and drawn back through a furnace at 700 degrees. Degrees are approximate. The springs are then assembled as a unit and painted.
Fender Measurements: Bottom of fender lip to ground measurements. Front: 24 1/2 / Rear 21 5/8.
You may also like